Hook: Size 12 down eye wet fly hook Thread: Pearsall’s Gossamer light orange (6A) waxed. Rib and body: Copper wire Tail and body: Natural pheasant tail. Hackle: Grey partridge body feather.
From a Guide to River Trout Flies by John Roberts The copper wire underbody could be applied either separately or together with the Pearsall’s silk thread touching turns – Frank opted for the latter. The loose end of the body wire was left long and used to form the rib. Tail comprised 3 to 4 pheasant tail barbules adjusted to give a length ca. half the body. The body comprised touching turns of 4 to 6 pheasant tail barbules with a copper wire rib (5 turns) that was either wound in the same direction as the body fibres (for less visibility) or counter wound (for greater visibility) at the choice of the tier. The grey partridge feather was tied in at the tip and the whole feather used, to give a full spider hackle. After forming a small head with thread wraps the fly was finished off.
The Yellow Sally Nymph
Hook: Size 10 Long shank wet fly hookThread: Light brown 8/0 thread.Tail: Two light buff coloured goose biots.Body: Light buff rabbit fur dubbing.
From the Fly Fishers Handbook, by Malcolm Greenhalgh and Denys Ovenden The thread was started at the hook eye and a layer (touching turns) taken to a point opposite the barb of the hook. The two goose biots tails tied in either side of the hook to give ca. 45° angle and a tail length equivalent to that of the body. The fly’s dimensions were such that the thorax was half the length of the body (1/3 of the hook shank). The rib material was tied above the tail and the body constructed to give a carrot shaped profile with dubbing and ribbed with 5-turns of the floss. The turkey slip thorax cover and the hen hackle, tied in by their tips, were positioned immediately above the body; the thorax, like the body, was then constructed with dubbing. The hackle feather was palmered to about 1 mm from the hook eye and the thorax cover folded over – these were secured simultaneously with thread wraps. After trimming the feathers a small head was made and the fly finished off.
The Olive Bumble
Hook: Size 10 Captain Hamilton hook Thread: Light brown 8/0 thread. Tail: Golden pheasant crest feather. Rib: Small oval gold tinsel. Body: Golden bumble olive seals fur dubbing (Frankie McPhillips). Palmered Hackle: Golden olive and natural red game cock feathers. False Hackle: Blue jay wing or dyed blue guinea fowl feather.
From Trout and Salmon Flies of Ireland, by Peter O’Reilly The thread was started at the hook eye and the blue jay feather barbules tied in (forward of the eye) and rolled around the hook to form a ‘false hackle’. The tying thread was taken (touching turns) to a point opposite the hook barb and the tail tied in (the crest feather was held parallel to, and secured on top of, the hook). A small oval gold tinsel rib was tied in and the thread returned to the false hackle.
The body hackle feathers (barbule length ca. gape of the hook) tied in by the rachis (the good side towards the hook eye). The thread was returned to the tail and a dubbed body created ending at the false hackle. The body hackle was started with 2 turns around the shank and palmered the length of the body then secured by the rib (5 turns). The rib tied in with thread wraps and trimmed. The false hackle and body hackles were smooth down towards the tail of the fly and a small head created with thread wraps before finishing off.
Hook: Size 10 Partridge Patriot double gold hook Thread: Black 8/0 thread. Tag: Fine gold oval tinsel /orange Glo-brite floss No. 6. Body: Black 600 denier floss. Tail: Golden Pheasant crest feather. Rib: Gold oval tinsel. Palmered Hackle: Orange Chinese cock feather. Hackle: Dyed blue spotted guinea fowl body feather Trigger point: Two Jungle Cock nails.
The black 8/0 thread was started at the eye and a layer the length of the shank added. Frank recommended securing the initial thread layer with a figure of eight around the root of the bifurcation of the double hook.
The double tag comprised fine gold tinsel; ca 4-turns with the tinsel end finished by folding under the tag and tying in at the base of the hook bifurcation, followed by ca 2mm wrap of hot orange floss of above the tinsel.
The golden pheasant crest feather tail was tied in over the tag and the rib (same material as the tag tinsel) tied in with thread wraps back to the head area.
A doubled-up length of black floss tied in at the head area. The body was made by touching turns of the doubled floss the full length of the body and back, tying in at the head area.
A “dirty orange” cock hackle was tied in by the rachis at the head area (the rachis was flattened to ensure that the feather tied in securely without adding too much bulk to the body) and palmered the length of the shank and secured by ca 5 turns of the tinsel rib.
A blue guinea fowl hackle (2-3 turns) was tied in by the feather tip and 2 Jungle cock feathers pointing upwards away from the hook eye.
The Cascade (and variant)
Hook: Size 10 Partridge Patriot double hook Thread: Black 8/0 thread. Tail: Yellow / hot orange bucktail / Krystal flash Body: Flat silver tinsel (oval for variant)/ black floss. Rib: Fine silver oval tinsel. Wing: Black squirrel tail/ Krystal flash. Hackle: Sunburst yellow/orange cock feathers
On the evening Frank tied a variant of this fly owing to the lack of flat silver tinsel and opted not to add micro Krystal flash to the tail and wing, the tying describes the tying of the standard with crystal flash rather than the variant: the photo above is of the standard fly.
The black 8/0 thread was started at the eye and a layer the length of the shank added.
The tail length was ca 2 times the length of the hook shank (shorter tails could be tied if desired) and was sequential; a small clump of yellow and similar of hot orange bucktail tied over, 4-strands of Krystal flash could be added if desired.
The fine oval tinsel rib was tied in at the tail and medium flat silver tinsel tied in half way along the shank with thread wraps. The lower half of the body was made by overlapping wraps of flat silver tinsel to the tail and back to half way along the shank. Black floss was then tied in at the head with overlapping wraps to the start of the silver tinsel and back to the head area to form the 2nd half of the body. The whole of the body was ribbed by ca 5-turns of the oval silver tinsel.
(In the variant tied on the evening: touching turns of the rib material (oval silver tinsel) was used to create the first half of the body then tied in. The 2nd half of the body formed, as above, and the black floss body section ribbed with the end piece of oval silver tinsel).
The wing was formed with a small clump of black squirrel tail tied in below the head area to approximately 1/2 the length of the tail, 2 strands of Krystal flash cut to the wing length could be added if desired.
The hackle comprised 2-3 turns of sunburst yellow Chinese cock feather (tied in at the tip) followed by a similarly tied orange Chinese cock hackle.
Please find below photos and pattern details of the competition patterns which Frank demonstrated last night. Good luck in the forthcoming club competition.
CDC Loop Winged Emerger
Hook: fine wire sedge/scud hook size 12. Thread: black 8/0. Shuck: one to three strands of pearl Krystal flash. Rib: one strand pearl Krystal flash. Abdomen: fine textured brown dubbing. Thorax: dark brown haretron dubbing or similar. Wing: two grey CDC feathers.